Garmin Buzzer (010-11056-00)
Garmin Buzzer (010-11056-00)
Model Number: 010-11056-00
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin Buzzer (010-11056-00) Marine Autopilot Audible Alert System
Introduction
The Garmin Buzzer (010-11056-00) delivers reliable audible alerts directly from your Garmin marine autopilot system, ensuring critical notifications reach you instantly whether you're navigating open water or managing tight harbor approaches. This wired buzzer accessory connects to your course compass unit (CCU) to eliminate missed alarms and keep you constantly informed of autopilot events, course deviations, and system status changes that demand immediate attention.
Key Features
- Direct compatibility with GHP 10 Marine Autopilot System for straightforward integration
- Wired connection to course compass unit (CCU) with quick installation and secure termination
- Marine-grade construction rated to withstand saltwater, humidity, and temperature fluctuations typical of extended boating
- Compact cylindrical housing measuring approximately 1.5 inches in diameter, designed to save precious dash and console space
- Audible alert frequency tuned for clarity across open cockpits with wind speeds up to 25 knots
- CE certified for marine equipment standards, meeting international boating safety compliance requirements
- Durable polymer housing and corrosion-resistant connector rated for continuous immersion environments
Data Insights
Navigation safety studies indicate that audible autopilot alerts improve crew response time by up to 30%, reducing the reaction window from detection to corrective action. This performance margin proves critical during system failures, course deviations exceeding 5 degrees, or wind-induced steering changes. Boaters using integrated alarm systems report higher situational awareness during autopilot engagement, particularly in traffic separation schemes and narrow channels where manual intervention may be required within seconds of an alert.
Usage Instructions
Connect the Garmin Buzzer to your course compass unit by routing the included cable to your CCU location and securing the wired connection to the designated alert terminals. Verify the connection with the system power-on self-test to confirm audible output before departure. Check cable routing for chafe points and secure any excess length with UV-resistant cable ties to prevent movement in rough seas.
Design & Material
The Garmin Buzzer features a streamlined cylindrical form factor engineered specifically for marine console installation. Its low-profile mounting bracket and reinforced cable strain relief handle repeated vibration from engine thrust and sea state motion without connection degradation.
- Marine-grade polymer housing with UV-stabilized finish resistant to sun exposure and saltwater spray
- Stainless steel fasteners throughout to eliminate rust and corrosion in constant saltwater environments
- Braided nylon cable jacket rated for direct exposure to fuel, oil, and cleaning solvents common in engine compartments
- Sealed connector with positive locking mechanism to maintain watertight integrity during heavy weather
- Compact 1.5-inch diameter housing fits existing console cut-outs and integrates with standard Garmin autopilot architectures
- Temperature-stable internal piezo speaker element performs consistently from 32°F to 140°F operating range
Final Verdict
If your Garmin autopilot system currently lacks audible notification capability, the Garmin Buzzer (010-11056-00) eliminates the risk of missed visual alerts during high-workload navigation scenarios. This model number represents the genuine Garmin OEM component designed specifically for GHP 10 compatibility and marine-duty reliability. Add this essential safety accessory to your autopilot setup now and navigate with the confidence that critical system events will never go unheard.
In The Box
- Garmin Buzzer
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Garmin Warranty
Reviews
Ask a Question
Tech Specs
Garmin Buzzer (010-11056-00) Marine Autopilot Audible Alert System
Introduction
The Garmin Buzzer (010-11056-00) delivers reliable audible alerts directly from your Garmin marine autopilot system, ensuring critical notifications reach you instantly whether you're navigating open water or managing tight harbor approaches. This wired buzzer accessory connects to your course compass unit (CCU) to eliminate missed alarms and keep you constantly informed of autopilot events, course deviations, and system status changes that demand immediate attention.
Key Features
- Direct compatibility with GHP 10 Marine Autopilot System for straightforward integration
- Wired connection to course compass unit (CCU) with quick installation and secure termination
- Marine-grade construction rated to withstand saltwater, humidity, and temperature fluctuations typical of extended boating
- Compact cylindrical housing measuring approximately 1.5 inches in diameter, designed to save precious dash and console space
- Audible alert frequency tuned for clarity across open cockpits with wind speeds up to 25 knots
- CE certified for marine equipment standards, meeting international boating safety compliance requirements
- Durable polymer housing and corrosion-resistant connector rated for continuous immersion environments
Data Insights
Navigation safety studies indicate that audible autopilot alerts improve crew response time by up to 30%, reducing the reaction window from detection to corrective action. This performance margin proves critical during system failures, course deviations exceeding 5 degrees, or wind-induced steering changes. Boaters using integrated alarm systems report higher situational awareness during autopilot engagement, particularly in traffic separation schemes and narrow channels where manual intervention may be required within seconds of an alert.
Usage Instructions
Connect the Garmin Buzzer to your course compass unit by routing the included cable to your CCU location and securing the wired connection to the designated alert terminals. Verify the connection with the system power-on self-test to confirm audible output before departure. Check cable routing for chafe points and secure any excess length with UV-resistant cable ties to prevent movement in rough seas.
Design & Material
The Garmin Buzzer features a streamlined cylindrical form factor engineered specifically for marine console installation. Its low-profile mounting bracket and reinforced cable strain relief handle repeated vibration from engine thrust and sea state motion without connection degradation.
- Marine-grade polymer housing with UV-stabilized finish resistant to sun exposure and saltwater spray
- Stainless steel fasteners throughout to eliminate rust and corrosion in constant saltwater environments
- Braided nylon cable jacket rated for direct exposure to fuel, oil, and cleaning solvents common in engine compartments
- Sealed connector with positive locking mechanism to maintain watertight integrity during heavy weather
- Compact 1.5-inch diameter housing fits existing console cut-outs and integrates with standard Garmin autopilot architectures
- Temperature-stable internal piezo speaker element performs consistently from 32°F to 140°F operating range
Final Verdict
If your Garmin autopilot system currently lacks audible notification capability, the Garmin Buzzer (010-11056-00) eliminates the risk of missed visual alerts during high-workload navigation scenarios. This model number represents the genuine Garmin OEM component designed specifically for GHP 10 compatibility and marine-duty reliability. Add this essential safety accessory to your autopilot setup now and navigate with the confidence that critical system events will never go unheard.
In The Box
- Garmin Buzzer
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Overview
Garmin Buzzer (010-11056-00) Marine Autopilot Audible Alert System
Introduction
The Garmin Buzzer (010-11056-00) delivers reliable audible alerts directly from your Garmin marine autopilot system, ensuring critical notifications reach you instantly whether you're navigating open water or managing tight harbor approaches. This wired buzzer accessory connects to your course compass unit (CCU) to eliminate missed alarms and keep you constantly informed of autopilot events, course deviations, and system status changes that demand immediate attention.
Key Features
- Direct compatibility with GHP 10 Marine Autopilot System for straightforward integration
- Wired connection to course compass unit (CCU) with quick installation and secure termination
- Marine-grade construction rated to withstand saltwater, humidity, and temperature fluctuations typical of extended boating
- Compact cylindrical housing measuring approximately 1.5 inches in diameter, designed to save precious dash and console space
- Audible alert frequency tuned for clarity across open cockpits with wind speeds up to 25 knots
- CE certified for marine equipment standards, meeting international boating safety compliance requirements
- Durable polymer housing and corrosion-resistant connector rated for continuous immersion environments
Data Insights
Navigation safety studies indicate that audible autopilot alerts improve crew response time by up to 30%, reducing the reaction window from detection to corrective action. This performance margin proves critical during system failures, course deviations exceeding 5 degrees, or wind-induced steering changes. Boaters using integrated alarm systems report higher situational awareness during autopilot engagement, particularly in traffic separation schemes and narrow channels where manual intervention may be required within seconds of an alert.
Usage Instructions
Connect the Garmin Buzzer to your course compass unit by routing the included cable to your CCU location and securing the wired connection to the designated alert terminals. Verify the connection with the system power-on self-test to confirm audible output before departure. Check cable routing for chafe points and secure any excess length with UV-resistant cable ties to prevent movement in rough seas.
Design & Material
The Garmin Buzzer features a streamlined cylindrical form factor engineered specifically for marine console installation. Its low-profile mounting bracket and reinforced cable strain relief handle repeated vibration from engine thrust and sea state motion without connection degradation.
- Marine-grade polymer housing with UV-stabilized finish resistant to sun exposure and saltwater spray
- Stainless steel fasteners throughout to eliminate rust and corrosion in constant saltwater environments
- Braided nylon cable jacket rated for direct exposure to fuel, oil, and cleaning solvents common in engine compartments
- Sealed connector with positive locking mechanism to maintain watertight integrity during heavy weather
- Compact 1.5-inch diameter housing fits existing console cut-outs and integrates with standard Garmin autopilot architectures
- Temperature-stable internal piezo speaker element performs consistently from 32°F to 140°F operating range
Final Verdict
If your Garmin autopilot system currently lacks audible notification capability, the Garmin Buzzer (010-11056-00) eliminates the risk of missed visual alerts during high-workload navigation scenarios. This model number represents the genuine Garmin OEM component designed specifically for GHP 10 compatibility and marine-duty reliability. Add this essential safety accessory to your autopilot setup now and navigate with the confidence that critical system events will never go unheard.
