Garmin Antenna Cable 10 Meters (010-11454-00)
Garmin Antenna Cable 10 Meters (010-11454-00)
Model Number: 010-11454-00
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin Antenna Cable 10 Meters (010-11454-00) — Marine-Grade Connectivity for GPS and AIS Systems
Introduction
The Garmin Antenna Cable 010-11454-00 is a 10-meter marine-grade connection cable engineered to reliably transmit GPS and AIS signals between compatible Garmin antennas and chartplotters. Built for saltwater environments, this cable delivers consistent signal integrity across extended distances, making it essential for vessels that depend on accurate navigation and real-time vessel tracking.
Key Features
- Length: 10 meters (32 feet) — provides installation flexibility for vessel layouts ranging from center consoles to large cruisers
- Compatibility: Works with Garmin GA 38 GPS/GLONASS Antenna and Garmin AIS 600 Blackbox Transceiver systems
- Signal Retention: Engineered to maintain up to 98% signal integrity over long cable runs
- Connector Type: Corrosion-resistant BNC-style connectors to prevent oxidation in humid marine climates
- Weather Resistance: Rated for UV exposure, saltwater spray, and sustained moisture contact without performance degradation
- Flexibility: Cable diameter and construction allow routing through tight spaces and around hardware without kinking or signal loss
Data Insights
Marine electronics installations often suffer from signal degradation when cables exceed 6 meters in length. This cable maintains the 98% signal retention metric even at its full 10-meter specification, a critical advantage for larger vessels where antenna-to-chartplotter distances are unavoidable. This performance level directly impacts GPS accuracy and AIS reception reliability, both essential for collision avoidance and navigation in congested waters.
Usage Instructions
Install the cable by firmly connecting the male BNC connectors to both the antenna and the compatible Garmin chartplotter until hand-tight. Route the cable away from power lines and engine harnesses to minimize electromagnetic interference. Avoid sharp bends with radii smaller than 2 inches. After installation, visually inspect connectors monthly and after heavy weather to ensure no corrosion or loosening has occurred. If the vessel sits unused for extended periods, apply a light coat of dielectric grease to connectors to maintain corrosion resistance.
Design & Material
The antenna cable balances durability with ease of installation. The overall design prioritizes practical marine use while withstanding the demanding conditions of offshore and coastal boating.
- Marine-grade coaxial cable with low-loss construction to preserve signal quality across the full 10-meter run
- Outer jacket composed of UV-stabilized, abrasion-resistant polymer rated for continuous sun exposure
- Shielded conductor design minimizes noise pickup from nearby electronics and engine systems
- Corrosion-resistant BNC connectors with nickel-plated brass bodies and stainless-steel hardware
- Lightweight construction (under 1 pound) reduces installation strain on mounting brackets and connectors
- Flexible design allows coiling and routing without inducing kinks or internal conductor damage
Final Verdict
For boaters relying on Garmin GA 38 or AIS 600 systems, the 010-11454-00 cable is the correct replacement or extension solution. Its 10-meter length, marine-specific construction, and proven signal integrity make it indispensable for vessels where reliable navigation and collision avoidance depend on uninterrupted antenna connectivity. Install with confidence knowing this cable meets the electrical and environmental demands of real marine use.
In The Box
- Garmin Antenna Cable (10m)
Manual & Warranty
Garmin Warranty
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Reviews
Ask a Question
Tech Specs
Garmin Antenna Cable 10 Meters (010-11454-00) — Marine-Grade Connectivity for GPS and AIS Systems
Introduction
The Garmin Antenna Cable 010-11454-00 is a 10-meter marine-grade connection cable engineered to reliably transmit GPS and AIS signals between compatible Garmin antennas and chartplotters. Built for saltwater environments, this cable delivers consistent signal integrity across extended distances, making it essential for vessels that depend on accurate navigation and real-time vessel tracking.
Key Features
- Length: 10 meters (32 feet) — provides installation flexibility for vessel layouts ranging from center consoles to large cruisers
- Compatibility: Works with Garmin GA 38 GPS/GLONASS Antenna and Garmin AIS 600 Blackbox Transceiver systems
- Signal Retention: Engineered to maintain up to 98% signal integrity over long cable runs
- Connector Type: Corrosion-resistant BNC-style connectors to prevent oxidation in humid marine climates
- Weather Resistance: Rated for UV exposure, saltwater spray, and sustained moisture contact without performance degradation
- Flexibility: Cable diameter and construction allow routing through tight spaces and around hardware without kinking or signal loss
Data Insights
Marine electronics installations often suffer from signal degradation when cables exceed 6 meters in length. This cable maintains the 98% signal retention metric even at its full 10-meter specification, a critical advantage for larger vessels where antenna-to-chartplotter distances are unavoidable. This performance level directly impacts GPS accuracy and AIS reception reliability, both essential for collision avoidance and navigation in congested waters.
Usage Instructions
Install the cable by firmly connecting the male BNC connectors to both the antenna and the compatible Garmin chartplotter until hand-tight. Route the cable away from power lines and engine harnesses to minimize electromagnetic interference. Avoid sharp bends with radii smaller than 2 inches. After installation, visually inspect connectors monthly and after heavy weather to ensure no corrosion or loosening has occurred. If the vessel sits unused for extended periods, apply a light coat of dielectric grease to connectors to maintain corrosion resistance.
Design & Material
The antenna cable balances durability with ease of installation. The overall design prioritizes practical marine use while withstanding the demanding conditions of offshore and coastal boating.
- Marine-grade coaxial cable with low-loss construction to preserve signal quality across the full 10-meter run
- Outer jacket composed of UV-stabilized, abrasion-resistant polymer rated for continuous sun exposure
- Shielded conductor design minimizes noise pickup from nearby electronics and engine systems
- Corrosion-resistant BNC connectors with nickel-plated brass bodies and stainless-steel hardware
- Lightweight construction (under 1 pound) reduces installation strain on mounting brackets and connectors
- Flexible design allows coiling and routing without inducing kinks or internal conductor damage
Final Verdict
For boaters relying on Garmin GA 38 or AIS 600 systems, the 010-11454-00 cable is the correct replacement or extension solution. Its 10-meter length, marine-specific construction, and proven signal integrity make it indispensable for vessels where reliable navigation and collision avoidance depend on uninterrupted antenna connectivity. Install with confidence knowing this cable meets the electrical and environmental demands of real marine use.
In The Box
- Garmin Antenna Cable (10m)
Manual & Warranty
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Overview
Garmin Antenna Cable 10 Meters (010-11454-00) — Marine-Grade Connectivity for GPS and AIS Systems
Introduction
The Garmin Antenna Cable 010-11454-00 is a 10-meter marine-grade connection cable engineered to reliably transmit GPS and AIS signals between compatible Garmin antennas and chartplotters. Built for saltwater environments, this cable delivers consistent signal integrity across extended distances, making it essential for vessels that depend on accurate navigation and real-time vessel tracking.
Key Features
- Length: 10 meters (32 feet) — provides installation flexibility for vessel layouts ranging from center consoles to large cruisers
- Compatibility: Works with Garmin GA 38 GPS/GLONASS Antenna and Garmin AIS 600 Blackbox Transceiver systems
- Signal Retention: Engineered to maintain up to 98% signal integrity over long cable runs
- Connector Type: Corrosion-resistant BNC-style connectors to prevent oxidation in humid marine climates
- Weather Resistance: Rated for UV exposure, saltwater spray, and sustained moisture contact without performance degradation
- Flexibility: Cable diameter and construction allow routing through tight spaces and around hardware without kinking or signal loss
Data Insights
Marine electronics installations often suffer from signal degradation when cables exceed 6 meters in length. This cable maintains the 98% signal retention metric even at its full 10-meter specification, a critical advantage for larger vessels where antenna-to-chartplotter distances are unavoidable. This performance level directly impacts GPS accuracy and AIS reception reliability, both essential for collision avoidance and navigation in congested waters.
Usage Instructions
Install the cable by firmly connecting the male BNC connectors to both the antenna and the compatible Garmin chartplotter until hand-tight. Route the cable away from power lines and engine harnesses to minimize electromagnetic interference. Avoid sharp bends with radii smaller than 2 inches. After installation, visually inspect connectors monthly and after heavy weather to ensure no corrosion or loosening has occurred. If the vessel sits unused for extended periods, apply a light coat of dielectric grease to connectors to maintain corrosion resistance.
Design & Material
The antenna cable balances durability with ease of installation. The overall design prioritizes practical marine use while withstanding the demanding conditions of offshore and coastal boating.
- Marine-grade coaxial cable with low-loss construction to preserve signal quality across the full 10-meter run
- Outer jacket composed of UV-stabilized, abrasion-resistant polymer rated for continuous sun exposure
- Shielded conductor design minimizes noise pickup from nearby electronics and engine systems
- Corrosion-resistant BNC connectors with nickel-plated brass bodies and stainless-steel hardware
- Lightweight construction (under 1 pound) reduces installation strain on mounting brackets and connectors
- Flexible design allows coiling and routing without inducing kinks or internal conductor damage
Final Verdict
For boaters relying on Garmin GA 38 or AIS 600 systems, the 010-11454-00 cable is the correct replacement or extension solution. Its 10-meter length, marine-specific construction, and proven signal integrity make it indispensable for vessels where reliable navigation and collision avoidance depend on uninterrupted antenna connectivity. Install with confidence knowing this cable meets the electrical and environmental demands of real marine use.
