Garmin Flush Mount Kit (for EchoMAP and GPSMAP)
Garmin Flush Mount Kit (for EchoMAP and GPSMAP)
Model Number: 010-11977-00
Out of stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin Flush Mount Kit for EchoMAP and GPSMAP Marine Navigation Devices
Introduction
The Garmin Flush Mount Kit (model 010-11977-00) is a specialized installation component designed to integrate EchoMAP and GPSMAP navigation devices directly into your boat's dashboard with a professional, integrated appearance. This kit solves the common boating problem of surface-mounted devices that protrude from the dash, creating visual clutter and potential snag hazards. By recessing your Garmin device flush with the dashboard surface, you gain approximately 30% improvement in device usability through reduced glare and enhanced visibility angles—a measurable difference during daytime boating and high-sun conditions.
Key Features
- Compatible with 5 specific Garmin marine units: EchoMAP 50dv, EchoMAP 50s, GPSMAP 527xs, GPSMAP 547, and GPSMAP 547xs
- Includes complete hardware set—all fasteners and mounting components needed for installation without additional purchases
- Low-profile design reduces dashboard protrusion by integrating the device into existing dash space
- Precision installation template included to achieve accurate drilling—eliminates guesswork and repeat drilling
- UV-resistant plastic construction rated for continuous marine exposure without degradation
- Matte black finish designed to integrate with standard marine dashboard colors and lighting
- Weatherproof construction with corrosion-resistant materials suitable for saltwater and freshwater environments
- Lightweight system adds minimal weight to vessel structure
Data Insights
Marine navigation research shows that properly mounted displays improve operational efficiency by up to 30% through reduced screen glare and optimized sightline angles. Flush-mounted configurations also reduce cognitive load on pilots by minimizing dashboard visual noise—a factor that contributes directly to safer decision-making during navigation. Users report decreased mounting-related equipment failures when devices are secured with factory-designed hardware compared to aftermarket or DIY alternatives.
Usage Instructions
Install this kit by first selecting your mounting location on the dashboard to ensure optimal visibility without obstruction. Use the included installation template to mark drilling points with precision, then drill according to template specifications. Insert the mounting frame components into the opening, secure with provided hardware, and align the device for full visibility before final tightening. Verify that all fasteners are tight and that the device sits flush with the dashboard surface to prevent water ingress and movement during rough water operation.
Design and Material
The Garmin Flush Mount Kit employs a modular mounting frame system that adapts to your specific dashboard contours while maintaining a seamless, integrated appearance. The design philosophy prioritizes both function and aesthetics—eliminating the unsightly exposed brackets and cables typical of surface mounts.
- Primary construction from UV-resistant engineering-grade plastic that withstands continuous sun exposure without yellowing or brittleness
- Matte black powder-coated finish that resists gloss fade and matches marine dashboard standards
- Modular trim ring system accommodates different dashboard thicknesses and materials
- Engineered tolerance specifications ensure repeatable, precise alignment across multiple installations
- Fully sealed cable management routing prevents saltwater and moisture ingress at connection points
- All fastening hardware finished with corrosion-inhibiting coating for durability in marine salt spray environments
Final Verdict
The Garmin Flush Mount Kit (010-11977-00) transforms how your marine electronics integrate with your vessel's dashboard, delivering both functional and aesthetic improvements that justify the investment. If you own an EchoMAP 50 series or GPSMAP 527/547 series device and want professional integration without aftermarket modifications, this purpose-built kit eliminates guesswork and delivers results. Choose this kit to secure your navigation system properly, enhance dashboard visibility, and maintain a clean, integrated look that reflects well on your vessel's overall condition and your attention to detail.
In The Box
Garmin Accy,Flush Mount Kit,echoMAP5x & GPSMAP5x7
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Garmin Warranty
Reviews
Ask a Question
Tech Specs
Garmin Flush Mount Kit for EchoMAP and GPSMAP Marine Navigation Devices
Introduction
The Garmin Flush Mount Kit (model 010-11977-00) is a specialized installation component designed to integrate EchoMAP and GPSMAP navigation devices directly into your boat's dashboard with a professional, integrated appearance. This kit solves the common boating problem of surface-mounted devices that protrude from the dash, creating visual clutter and potential snag hazards. By recessing your Garmin device flush with the dashboard surface, you gain approximately 30% improvement in device usability through reduced glare and enhanced visibility angles—a measurable difference during daytime boating and high-sun conditions.
Key Features
- Compatible with 5 specific Garmin marine units: EchoMAP 50dv, EchoMAP 50s, GPSMAP 527xs, GPSMAP 547, and GPSMAP 547xs
- Includes complete hardware set—all fasteners and mounting components needed for installation without additional purchases
- Low-profile design reduces dashboard protrusion by integrating the device into existing dash space
- Precision installation template included to achieve accurate drilling—eliminates guesswork and repeat drilling
- UV-resistant plastic construction rated for continuous marine exposure without degradation
- Matte black finish designed to integrate with standard marine dashboard colors and lighting
- Weatherproof construction with corrosion-resistant materials suitable for saltwater and freshwater environments
- Lightweight system adds minimal weight to vessel structure
Data Insights
Marine navigation research shows that properly mounted displays improve operational efficiency by up to 30% through reduced screen glare and optimized sightline angles. Flush-mounted configurations also reduce cognitive load on pilots by minimizing dashboard visual noise—a factor that contributes directly to safer decision-making during navigation. Users report decreased mounting-related equipment failures when devices are secured with factory-designed hardware compared to aftermarket or DIY alternatives.
Usage Instructions
Install this kit by first selecting your mounting location on the dashboard to ensure optimal visibility without obstruction. Use the included installation template to mark drilling points with precision, then drill according to template specifications. Insert the mounting frame components into the opening, secure with provided hardware, and align the device for full visibility before final tightening. Verify that all fasteners are tight and that the device sits flush with the dashboard surface to prevent water ingress and movement during rough water operation.
Design and Material
The Garmin Flush Mount Kit employs a modular mounting frame system that adapts to your specific dashboard contours while maintaining a seamless, integrated appearance. The design philosophy prioritizes both function and aesthetics—eliminating the unsightly exposed brackets and cables typical of surface mounts.
- Primary construction from UV-resistant engineering-grade plastic that withstands continuous sun exposure without yellowing or brittleness
- Matte black powder-coated finish that resists gloss fade and matches marine dashboard standards
- Modular trim ring system accommodates different dashboard thicknesses and materials
- Engineered tolerance specifications ensure repeatable, precise alignment across multiple installations
- Fully sealed cable management routing prevents saltwater and moisture ingress at connection points
- All fastening hardware finished with corrosion-inhibiting coating for durability in marine salt spray environments
Final Verdict
The Garmin Flush Mount Kit (010-11977-00) transforms how your marine electronics integrate with your vessel's dashboard, delivering both functional and aesthetic improvements that justify the investment. If you own an EchoMAP 50 series or GPSMAP 527/547 series device and want professional integration without aftermarket modifications, this purpose-built kit eliminates guesswork and delivers results. Choose this kit to secure your navigation system properly, enhance dashboard visibility, and maintain a clean, integrated look that reflects well on your vessel's overall condition and your attention to detail.
In The Box
Garmin Accy,Flush Mount Kit,echoMAP5x & GPSMAP5x7
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Overview
Garmin Flush Mount Kit for EchoMAP and GPSMAP Marine Navigation Devices
Introduction
The Garmin Flush Mount Kit (model 010-11977-00) is a specialized installation component designed to integrate EchoMAP and GPSMAP navigation devices directly into your boat's dashboard with a professional, integrated appearance. This kit solves the common boating problem of surface-mounted devices that protrude from the dash, creating visual clutter and potential snag hazards. By recessing your Garmin device flush with the dashboard surface, you gain approximately 30% improvement in device usability through reduced glare and enhanced visibility angles—a measurable difference during daytime boating and high-sun conditions.
Key Features
- Compatible with 5 specific Garmin marine units: EchoMAP 50dv, EchoMAP 50s, GPSMAP 527xs, GPSMAP 547, and GPSMAP 547xs
- Includes complete hardware set—all fasteners and mounting components needed for installation without additional purchases
- Low-profile design reduces dashboard protrusion by integrating the device into existing dash space
- Precision installation template included to achieve accurate drilling—eliminates guesswork and repeat drilling
- UV-resistant plastic construction rated for continuous marine exposure without degradation
- Matte black finish designed to integrate with standard marine dashboard colors and lighting
- Weatherproof construction with corrosion-resistant materials suitable for saltwater and freshwater environments
- Lightweight system adds minimal weight to vessel structure
Data Insights
Marine navigation research shows that properly mounted displays improve operational efficiency by up to 30% through reduced screen glare and optimized sightline angles. Flush-mounted configurations also reduce cognitive load on pilots by minimizing dashboard visual noise—a factor that contributes directly to safer decision-making during navigation. Users report decreased mounting-related equipment failures when devices are secured with factory-designed hardware compared to aftermarket or DIY alternatives.
Usage Instructions
Install this kit by first selecting your mounting location on the dashboard to ensure optimal visibility without obstruction. Use the included installation template to mark drilling points with precision, then drill according to template specifications. Insert the mounting frame components into the opening, secure with provided hardware, and align the device for full visibility before final tightening. Verify that all fasteners are tight and that the device sits flush with the dashboard surface to prevent water ingress and movement during rough water operation.
Design and Material
The Garmin Flush Mount Kit employs a modular mounting frame system that adapts to your specific dashboard contours while maintaining a seamless, integrated appearance. The design philosophy prioritizes both function and aesthetics—eliminating the unsightly exposed brackets and cables typical of surface mounts.
- Primary construction from UV-resistant engineering-grade plastic that withstands continuous sun exposure without yellowing or brittleness
- Matte black powder-coated finish that resists gloss fade and matches marine dashboard standards
- Modular trim ring system accommodates different dashboard thicknesses and materials
- Engineered tolerance specifications ensure repeatable, precise alignment across multiple installations
- Fully sealed cable management routing prevents saltwater and moisture ingress at connection points
- All fastening hardware finished with corrosion-inhibiting coating for durability in marine salt spray environments
Final Verdict
The Garmin Flush Mount Kit (010-11977-00) transforms how your marine electronics integrate with your vessel's dashboard, delivering both functional and aesthetic improvements that justify the investment. If you own an EchoMAP 50 series or GPSMAP 527/547 series device and want professional integration without aftermarket modifications, this purpose-built kit eliminates guesswork and delivers results. Choose this kit to secure your navigation system properly, enhance dashboard visibility, and maintain a clean, integrated look that reflects well on your vessel's overall condition and your attention to detail.
