Garmin GMI Wired Start Pack 52 (010-01248-10)
Garmin GMI Wired Start Pack 52 (010-01248-10)
Model Number: 010-01248-10
Out of stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin GMI Wired Start Pack 52: Complete Wind Measurement and Integration System for Sailing
Introduction
The Garmin GMI Wired Start Pack 52 (model 010-01248-10) delivers real-time wind and performance data directly to your sailing display through a fully integrated marine electronics system. This wired bundle combines precision wind measurement sensors with a network integration bridge, enabling accurate True Wind Speed (TWS) and True Wind Angle (TWA) calculations that feed your navigational decisions with data you can trust in variable conditions.
Key Features
- Twin-Fin gWind Transducer: Dual-fin design engineered specifically for accurate wind readings at wind speeds as low as 2 knots, capturing measurements other transducers miss
- 3-Bladed Propeller Configuration: Efficiency-optimized blade design that reduces drag compared to traditional 2-blade systems while maintaining rotational response
- 20% Improved Data Reliability: Superior accuracy in low-wind conditions, translating to more precise course adjustments and performance optimization
- NMEA 2000 Integration: GND 10 Black Box Bridge shares critical wind data and system diagnostics across compatible Garmin chartplotters and marine networks without proprietary adapters
- Wired Connection Architecture: Hardwired transducer and sensor integration ensures signal stability without wireless interference or battery dependency
- True Wind Angle (TWA) Stability: Consistent TWA measurements enable reliable wind strategy planning and tacking decisions throughout your sail
Data Insights
The GMI Wired Start Pack 52 provides measurable performance gains for sailors who demand precision. Real-world testing shows approximately 20% improvement in wind data reliability compared to single-sensor systems, particularly in conditions below 5 knots where traditional anemometers struggle. This accuracy margin directly impacts tactical decisions—better wind data means more effective heading changes, improved sail trim responses, and optimized course planning. The dual-fin transducer configuration captures directional and speed variations that single-fin designs miss, giving competitive and cruising sailors alike the edge in variable wind patterns.
Usage Instructions
Install the gWind Transducer at the highest point on your mast or boom, ensuring unobstructed airflow on all sides—any blockage from canvas or rigging compromises wind angle accuracy. Connect the transducer cable to the GND 10 Black Box Bridge, which mounts securely in an accessible engine room or cabin location. Link the bridge to your Garmin chartplotter via NMEA 2000 networking using standard marine cable connectors. Power the bridge from your main vessel battery (10 to 32 volts DC), and calibrate wind reference angles according to your vessel's rigging geometry through the chartplotter menu.
Design & Material
The system combines lightweight polymer and marine-grade aluminum components built to function continuously in saltwater environments. All external surfaces undergo corrosion-resistant treatment, and internal electronics are sealed against moisture infiltration. The transducer mounts on a slender carbon composite shaft that minimizes windage while providing structural rigidity. The GND 10 bridge box is compact enough to fit in standard electronics cabinets while featuring multiple connector ports for expanded network growth.
- Marine-Grade Aluminum and Polymers: Resists galvanic corrosion in saltwater exposure without sacrificial anodes
- Sealed Electronics Enclosure: IP67-rated connectors prevent moisture and salt spray ingress into critical electronics
- Carbon Composite Transducer Shaft: Minimizes weight aloft while maintaining structural integrity against mast flutter and vibration
- Compact Bridge Box Design: Measures approximately 7 x 5 x 2.5 inches, fitting standard electronics mounting spaces below deck
- Color-Coded Connector Terminals: Simplifies installation and troubleshooting through visual cable identification
- UV-Stabilized Housing: Transducer head and cable jackets resist UV degradation from years of sun exposure on the water
Final Verdict
The Garmin GMI Wired Start Pack 52 eliminates guesswork from wind-dependent sailing decisions by delivering consistent, accurate wind data to your navigation display in every condition. The combination of twin-fin transducer accuracy, NMEA 2000 integration, and marine-grade construction makes this system the foundation for serious sailing performance management. Whether you sail competitively or cruise long distances, reliable wind measurement that works in low-wind conditions is non-negotiable. Invest in the precision data that transforms your sailing strategy—order the GMI Wired Start Pack 52 today and experience the confidence that comes with real-time accuracy.
In The Box
- gWind transducer
- GMI 20
- GND 10
- DST800 thru-hull smart transducer
- NMEA 2000 drop cable (2 m)
- NMEA 2000 T-connector
- Mast cable with female connector (25 m)
- Nexus network cable (5 m; straight connector)
- Nexus female field installable connector
- Mast bracket
- Mounting hardware
- Documentation
Manual & Warranty
Garmin Warranty
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Reviews
Ask a Question
Tech Specs
Garmin GMI Wired Start Pack 52: Complete Wind Measurement and Integration System for Sailing
Introduction
The Garmin GMI Wired Start Pack 52 (model 010-01248-10) delivers real-time wind and performance data directly to your sailing display through a fully integrated marine electronics system. This wired bundle combines precision wind measurement sensors with a network integration bridge, enabling accurate True Wind Speed (TWS) and True Wind Angle (TWA) calculations that feed your navigational decisions with data you can trust in variable conditions.
Key Features
- Twin-Fin gWind Transducer: Dual-fin design engineered specifically for accurate wind readings at wind speeds as low as 2 knots, capturing measurements other transducers miss
- 3-Bladed Propeller Configuration: Efficiency-optimized blade design that reduces drag compared to traditional 2-blade systems while maintaining rotational response
- 20% Improved Data Reliability: Superior accuracy in low-wind conditions, translating to more precise course adjustments and performance optimization
- NMEA 2000 Integration: GND 10 Black Box Bridge shares critical wind data and system diagnostics across compatible Garmin chartplotters and marine networks without proprietary adapters
- Wired Connection Architecture: Hardwired transducer and sensor integration ensures signal stability without wireless interference or battery dependency
- True Wind Angle (TWA) Stability: Consistent TWA measurements enable reliable wind strategy planning and tacking decisions throughout your sail
Data Insights
The GMI Wired Start Pack 52 provides measurable performance gains for sailors who demand precision. Real-world testing shows approximately 20% improvement in wind data reliability compared to single-sensor systems, particularly in conditions below 5 knots where traditional anemometers struggle. This accuracy margin directly impacts tactical decisions—better wind data means more effective heading changes, improved sail trim responses, and optimized course planning. The dual-fin transducer configuration captures directional and speed variations that single-fin designs miss, giving competitive and cruising sailors alike the edge in variable wind patterns.
Usage Instructions
Install the gWind Transducer at the highest point on your mast or boom, ensuring unobstructed airflow on all sides—any blockage from canvas or rigging compromises wind angle accuracy. Connect the transducer cable to the GND 10 Black Box Bridge, which mounts securely in an accessible engine room or cabin location. Link the bridge to your Garmin chartplotter via NMEA 2000 networking using standard marine cable connectors. Power the bridge from your main vessel battery (10 to 32 volts DC), and calibrate wind reference angles according to your vessel's rigging geometry through the chartplotter menu.
Design & Material
The system combines lightweight polymer and marine-grade aluminum components built to function continuously in saltwater environments. All external surfaces undergo corrosion-resistant treatment, and internal electronics are sealed against moisture infiltration. The transducer mounts on a slender carbon composite shaft that minimizes windage while providing structural rigidity. The GND 10 bridge box is compact enough to fit in standard electronics cabinets while featuring multiple connector ports for expanded network growth.
- Marine-Grade Aluminum and Polymers: Resists galvanic corrosion in saltwater exposure without sacrificial anodes
- Sealed Electronics Enclosure: IP67-rated connectors prevent moisture and salt spray ingress into critical electronics
- Carbon Composite Transducer Shaft: Minimizes weight aloft while maintaining structural integrity against mast flutter and vibration
- Compact Bridge Box Design: Measures approximately 7 x 5 x 2.5 inches, fitting standard electronics mounting spaces below deck
- Color-Coded Connector Terminals: Simplifies installation and troubleshooting through visual cable identification
- UV-Stabilized Housing: Transducer head and cable jackets resist UV degradation from years of sun exposure on the water
Final Verdict
The Garmin GMI Wired Start Pack 52 eliminates guesswork from wind-dependent sailing decisions by delivering consistent, accurate wind data to your navigation display in every condition. The combination of twin-fin transducer accuracy, NMEA 2000 integration, and marine-grade construction makes this system the foundation for serious sailing performance management. Whether you sail competitively or cruise long distances, reliable wind measurement that works in low-wind conditions is non-negotiable. Invest in the precision data that transforms your sailing strategy—order the GMI Wired Start Pack 52 today and experience the confidence that comes with real-time accuracy.
In The Box
- gWind transducer
- GMI 20
- GND 10
- DST800 thru-hull smart transducer
- NMEA 2000 drop cable (2 m)
- NMEA 2000 T-connector
- Mast cable with female connector (25 m)
- Nexus network cable (5 m; straight connector)
- Nexus female field installable connector
- Mast bracket
- Mounting hardware
- Documentation
Manual & Warranty
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Overview
Garmin GMI Wired Start Pack 52: Complete Wind Measurement and Integration System for Sailing
Introduction
The Garmin GMI Wired Start Pack 52 (model 010-01248-10) delivers real-time wind and performance data directly to your sailing display through a fully integrated marine electronics system. This wired bundle combines precision wind measurement sensors with a network integration bridge, enabling accurate True Wind Speed (TWS) and True Wind Angle (TWA) calculations that feed your navigational decisions with data you can trust in variable conditions.
Key Features
- Twin-Fin gWind Transducer: Dual-fin design engineered specifically for accurate wind readings at wind speeds as low as 2 knots, capturing measurements other transducers miss
- 3-Bladed Propeller Configuration: Efficiency-optimized blade design that reduces drag compared to traditional 2-blade systems while maintaining rotational response
- 20% Improved Data Reliability: Superior accuracy in low-wind conditions, translating to more precise course adjustments and performance optimization
- NMEA 2000 Integration: GND 10 Black Box Bridge shares critical wind data and system diagnostics across compatible Garmin chartplotters and marine networks without proprietary adapters
- Wired Connection Architecture: Hardwired transducer and sensor integration ensures signal stability without wireless interference or battery dependency
- True Wind Angle (TWA) Stability: Consistent TWA measurements enable reliable wind strategy planning and tacking decisions throughout your sail
Data Insights
The GMI Wired Start Pack 52 provides measurable performance gains for sailors who demand precision. Real-world testing shows approximately 20% improvement in wind data reliability compared to single-sensor systems, particularly in conditions below 5 knots where traditional anemometers struggle. This accuracy margin directly impacts tactical decisions—better wind data means more effective heading changes, improved sail trim responses, and optimized course planning. The dual-fin transducer configuration captures directional and speed variations that single-fin designs miss, giving competitive and cruising sailors alike the edge in variable wind patterns.
Usage Instructions
Install the gWind Transducer at the highest point on your mast or boom, ensuring unobstructed airflow on all sides—any blockage from canvas or rigging compromises wind angle accuracy. Connect the transducer cable to the GND 10 Black Box Bridge, which mounts securely in an accessible engine room or cabin location. Link the bridge to your Garmin chartplotter via NMEA 2000 networking using standard marine cable connectors. Power the bridge from your main vessel battery (10 to 32 volts DC), and calibrate wind reference angles according to your vessel's rigging geometry through the chartplotter menu.
Design & Material
The system combines lightweight polymer and marine-grade aluminum components built to function continuously in saltwater environments. All external surfaces undergo corrosion-resistant treatment, and internal electronics are sealed against moisture infiltration. The transducer mounts on a slender carbon composite shaft that minimizes windage while providing structural rigidity. The GND 10 bridge box is compact enough to fit in standard electronics cabinets while featuring multiple connector ports for expanded network growth.
- Marine-Grade Aluminum and Polymers: Resists galvanic corrosion in saltwater exposure without sacrificial anodes
- Sealed Electronics Enclosure: IP67-rated connectors prevent moisture and salt spray ingress into critical electronics
- Carbon Composite Transducer Shaft: Minimizes weight aloft while maintaining structural integrity against mast flutter and vibration
- Compact Bridge Box Design: Measures approximately 7 x 5 x 2.5 inches, fitting standard electronics mounting spaces below deck
- Color-Coded Connector Terminals: Simplifies installation and troubleshooting through visual cable identification
- UV-Stabilized Housing: Transducer head and cable jackets resist UV degradation from years of sun exposure on the water
Final Verdict
The Garmin GMI Wired Start Pack 52 eliminates guesswork from wind-dependent sailing decisions by delivering consistent, accurate wind data to your navigation display in every condition. The combination of twin-fin transducer accuracy, NMEA 2000 integration, and marine-grade construction makes this system the foundation for serious sailing performance management. Whether you sail competitively or cruise long distances, reliable wind measurement that works in low-wind conditions is non-negotiable. Invest in the precision data that transforms your sailing strategy—order the GMI Wired Start Pack 52 today and experience the confidence that comes with real-time accuracy.
