Garmin Mount Adapter (for GPS and GPSMAP)
Garmin Mount Adapter (for GPS and GPSMAP)
Model Number: 010-10353-00
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin Mount Adapter for GPS and GPSMAP Devices
Introduction
The Garmin Mount Adapter (model 010-10353-00) delivers reliable hands-free mounting for your Garmin GPS or GPSMAP handheld receiver during outdoor navigation. This adhesive-based adapter secures your device to vehicles, boats, or hiking gear without requiring complex drilling or permanent installation, keeping your navigation visible and accessible while you move through challenging terrain or open water.
Key Features
- Industrial-strength adhesive mounting system rated for stable hold on curved and flat surfaces
- Compatible with Garmin GPS 72, GPS 76, GPSMAP 176, and similar handheld GPS models
- Weather-resistant construction engineered for exposure to rain, temperature fluctuations between -10°C and 60°C, and UV radiation
- Compact and lightweight design weighing less than 100 grams for minimal weight impact on vehicles or gear
- Aerospace-grade polymer materials providing 50+ percent increase in durability over standard plastic mounts
- 24-hour full cure time required for maximum adhesive strength and long-term reliability
Data Insights
Users who deploy secure GPS mounts report a 30% improvement in navigation efficiency during backcountry hiking, boating, and off-road activities. A stable, properly positioned GPS unit reduces the need to stop and reorient your device, allowing continuous route monitoring and reducing the risk of deviation from planned paths in low-visibility conditions.
Usage Instructions
Clean the mounting surface thoroughly with rubbing alcohol to remove dirt, oils, and residue before applying the adapter. Position the mount at your desired angle, press firmly to activate the adhesive, and allow a full 24 hours of undisturbed cure time before attaching your GPS device. This ensures maximum bond strength and prevents premature separation during use.
Design & Material
The Garmin Mount Adapter combines functional simplicity with proven outdoor durability. The design uses a minimal number of components to reduce weight while maintaining structural integrity across temperature extremes and vibration. Its ball-and-socket construction allows multi-axis adjustment after initial mounting, enabling you to reposition your device without removing the adapter from your mounting surface.
- Aerospace-grade polymer base construction for high strength-to-weight ratio
- Permanently bonded adhesive formulation rated for outdoor temperature ranges of -10°C to 60°C
- Weatherproof external coating resists saltwater, freshwater, and UV degradation
- Ball-joint connection mechanism allows 360-degree rotation and multiple viewing angles
- Minimal profile design keeps the total height under 35 millimeters when mounted
- Model 010-10353-00 engineering optimized for direct compatibility with factory Garmin receivers
Final Verdict
This mount adapter solves a fundamental problem for GPS users: keeping your navigation device visible and secure without blocking your windshield, handlebars, or pack straps. The adhesive mounting eliminates fumbling with brackets and fasteners, the aerospace-grade materials handle real outdoor abuse, and the 30% boost in navigation efficiency directly reduces navigation errors on your next trail, waterway, or expedition. If you rely on Garmin GPS navigation in the field, this adapter is the practical difference between struggling with a loose device and moving confidently through unmapped terrain. Add it to your outdoor kit today.
In The Box
Manual & Warranty
Garmin Warranty
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Reviews
Ask a Question
Tech Specs
Garmin Mount Adapter for GPS and GPSMAP Devices
Introduction
The Garmin Mount Adapter (model 010-10353-00) delivers reliable hands-free mounting for your Garmin GPS or GPSMAP handheld receiver during outdoor navigation. This adhesive-based adapter secures your device to vehicles, boats, or hiking gear without requiring complex drilling or permanent installation, keeping your navigation visible and accessible while you move through challenging terrain or open water.
Key Features
- Industrial-strength adhesive mounting system rated for stable hold on curved and flat surfaces
- Compatible with Garmin GPS 72, GPS 76, GPSMAP 176, and similar handheld GPS models
- Weather-resistant construction engineered for exposure to rain, temperature fluctuations between -10°C and 60°C, and UV radiation
- Compact and lightweight design weighing less than 100 grams for minimal weight impact on vehicles or gear
- Aerospace-grade polymer materials providing 50+ percent increase in durability over standard plastic mounts
- 24-hour full cure time required for maximum adhesive strength and long-term reliability
Data Insights
Users who deploy secure GPS mounts report a 30% improvement in navigation efficiency during backcountry hiking, boating, and off-road activities. A stable, properly positioned GPS unit reduces the need to stop and reorient your device, allowing continuous route monitoring and reducing the risk of deviation from planned paths in low-visibility conditions.
Usage Instructions
Clean the mounting surface thoroughly with rubbing alcohol to remove dirt, oils, and residue before applying the adapter. Position the mount at your desired angle, press firmly to activate the adhesive, and allow a full 24 hours of undisturbed cure time before attaching your GPS device. This ensures maximum bond strength and prevents premature separation during use.
Design & Material
The Garmin Mount Adapter combines functional simplicity with proven outdoor durability. The design uses a minimal number of components to reduce weight while maintaining structural integrity across temperature extremes and vibration. Its ball-and-socket construction allows multi-axis adjustment after initial mounting, enabling you to reposition your device without removing the adapter from your mounting surface.
- Aerospace-grade polymer base construction for high strength-to-weight ratio
- Permanently bonded adhesive formulation rated for outdoor temperature ranges of -10°C to 60°C
- Weatherproof external coating resists saltwater, freshwater, and UV degradation
- Ball-joint connection mechanism allows 360-degree rotation and multiple viewing angles
- Minimal profile design keeps the total height under 35 millimeters when mounted
- Model 010-10353-00 engineering optimized for direct compatibility with factory Garmin receivers
Final Verdict
This mount adapter solves a fundamental problem for GPS users: keeping your navigation device visible and secure without blocking your windshield, handlebars, or pack straps. The adhesive mounting eliminates fumbling with brackets and fasteners, the aerospace-grade materials handle real outdoor abuse, and the 30% boost in navigation efficiency directly reduces navigation errors on your next trail, waterway, or expedition. If you rely on Garmin GPS navigation in the field, this adapter is the practical difference between struggling with a loose device and moving confidently through unmapped terrain. Add it to your outdoor kit today.
In The Box
Manual & Warranty
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Overview
Garmin Mount Adapter for GPS and GPSMAP Devices
Introduction
The Garmin Mount Adapter (model 010-10353-00) delivers reliable hands-free mounting for your Garmin GPS or GPSMAP handheld receiver during outdoor navigation. This adhesive-based adapter secures your device to vehicles, boats, or hiking gear without requiring complex drilling or permanent installation, keeping your navigation visible and accessible while you move through challenging terrain or open water.
Key Features
- Industrial-strength adhesive mounting system rated for stable hold on curved and flat surfaces
- Compatible with Garmin GPS 72, GPS 76, GPSMAP 176, and similar handheld GPS models
- Weather-resistant construction engineered for exposure to rain, temperature fluctuations between -10°C and 60°C, and UV radiation
- Compact and lightweight design weighing less than 100 grams for minimal weight impact on vehicles or gear
- Aerospace-grade polymer materials providing 50+ percent increase in durability over standard plastic mounts
- 24-hour full cure time required for maximum adhesive strength and long-term reliability
Data Insights
Users who deploy secure GPS mounts report a 30% improvement in navigation efficiency during backcountry hiking, boating, and off-road activities. A stable, properly positioned GPS unit reduces the need to stop and reorient your device, allowing continuous route monitoring and reducing the risk of deviation from planned paths in low-visibility conditions.
Usage Instructions
Clean the mounting surface thoroughly with rubbing alcohol to remove dirt, oils, and residue before applying the adapter. Position the mount at your desired angle, press firmly to activate the adhesive, and allow a full 24 hours of undisturbed cure time before attaching your GPS device. This ensures maximum bond strength and prevents premature separation during use.
Design & Material
The Garmin Mount Adapter combines functional simplicity with proven outdoor durability. The design uses a minimal number of components to reduce weight while maintaining structural integrity across temperature extremes and vibration. Its ball-and-socket construction allows multi-axis adjustment after initial mounting, enabling you to reposition your device without removing the adapter from your mounting surface.
- Aerospace-grade polymer base construction for high strength-to-weight ratio
- Permanently bonded adhesive formulation rated for outdoor temperature ranges of -10°C to 60°C
- Weatherproof external coating resists saltwater, freshwater, and UV degradation
- Ball-joint connection mechanism allows 360-degree rotation and multiple viewing angles
- Minimal profile design keeps the total height under 35 millimeters when mounted
- Model 010-10353-00 engineering optimized for direct compatibility with factory Garmin receivers
Final Verdict
This mount adapter solves a fundamental problem for GPS users: keeping your navigation device visible and secure without blocking your windshield, handlebars, or pack straps. The adhesive mounting eliminates fumbling with brackets and fasteners, the aerospace-grade materials handle real outdoor abuse, and the 30% boost in navigation efficiency directly reduces navigation errors on your next trail, waterway, or expedition. If you rely on Garmin GPS navigation in the field, this adapter is the practical difference between struggling with a loose device and moving confidently through unmapped terrain. Add it to your outdoor kit today.
