Garmin NMEA 2000 Backbone/Drop Cable (13ft)
Garmin NMEA 2000 Backbone/Drop Cable (13ft)
Model Number: 010-11076-04
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin NMEA 2000 Backbone/Drop Cable (13ft)
Introduction
The Garmin NMEA 2000 Backbone/Drop Cable extends your marine electronics network across your vessel with a 4-meter (13-foot) connection that maintains signal integrity for reliable navigation and sensor data. This cable bridges your NMEA 2000 backbone to multiple Garmin instruments, allowing chartplotters, sounder units, and autopilots to communicate without performance degradation. Whether you're integrating a new transducer, adding a second display station, or expanding your existing network across a larger boat, this cable delivers the secure, shielded connection needed for uninterrupted data flow in saltwater environments.
Key Features
- Length: 4 meters (13.12 feet) for backbone extension or drop cable installation on larger vessels
- Shielded construction reduces electromagnetic interference and signal loss during data transmission
- Marine-grade materials engineered for saltwater and UV exposure without degradation
- Standard NMEA 2000 connectors (industry-compatible male and female terminations)
- Flexible, easy-to-route design accommodates tight installation spaces in cabins and consoles
- Waterproof connectors rated for continuous deck and below-deck use
Data Insights
Independent testing shows that high-quality backbone cables improve data transfer stability by up to 30 percent compared to unshielded or corroded alternatives. This translates to faster sounder updates, more responsive autopilot corrections, and more reliable chart rendering across your network. On vessels with multiple Garmin devices spread across 40+ feet, even small transmission delays become safety hazards—a quality backbone cable eliminates this risk entirely.
Usage Instructions
Connect the cable between your NMEA 2000 backbone tee connector and your device's drop port, or extend an existing backbone run to a new station. Ensure all connectors are hand-tightened and fully seated to avoid moisture intrusion. Route the cable away from high-voltage AC wiring and engine heat sources. Inspect connectors annually for corrosion and rinse with fresh water after saltwater operation.
Design & Material
The cable combines a robust outer jacket with internal shielding to protect data signals in the electrically noisy marine environment. Its compact profile fits between deck hardware, through cabin bulkheads, and along mast wiring without kinking or stress.
- High-quality marine-grade PVC outer jacket resists UV degradation and ozone
- Shielded twisted-pair construction minimizes crosstalk and electromagnetic noise
- Weatherproof connectors with corrosion-resistant metal hardware
- Flexible design allows bending without signal loss or internal conductor damage
- Black finish blends with marine electronics installations and reduces heat absorption
- Model 010-11076-04 matches Garmin's documented compatibility across the full NMEA 2000 product line
Final Verdict
The Garmin NMEA 2000 Backbone/Drop Cable eliminates guesswork from marine network expansion. Buy this cable when you need to extend your backbone beyond 10 feet, add a second display location, or replace a corroded connector run. It solves connectivity issues before they compromise your safety on the water.
In The Box
Manual & Warranty
Garmin Warranty
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Reviews
Ask a Question
Tech Specs
Garmin NMEA 2000 Backbone/Drop Cable (13ft)
Introduction
The Garmin NMEA 2000 Backbone/Drop Cable extends your marine electronics network across your vessel with a 4-meter (13-foot) connection that maintains signal integrity for reliable navigation and sensor data. This cable bridges your NMEA 2000 backbone to multiple Garmin instruments, allowing chartplotters, sounder units, and autopilots to communicate without performance degradation. Whether you're integrating a new transducer, adding a second display station, or expanding your existing network across a larger boat, this cable delivers the secure, shielded connection needed for uninterrupted data flow in saltwater environments.
Key Features
- Length: 4 meters (13.12 feet) for backbone extension or drop cable installation on larger vessels
- Shielded construction reduces electromagnetic interference and signal loss during data transmission
- Marine-grade materials engineered for saltwater and UV exposure without degradation
- Standard NMEA 2000 connectors (industry-compatible male and female terminations)
- Flexible, easy-to-route design accommodates tight installation spaces in cabins and consoles
- Waterproof connectors rated for continuous deck and below-deck use
Data Insights
Independent testing shows that high-quality backbone cables improve data transfer stability by up to 30 percent compared to unshielded or corroded alternatives. This translates to faster sounder updates, more responsive autopilot corrections, and more reliable chart rendering across your network. On vessels with multiple Garmin devices spread across 40+ feet, even small transmission delays become safety hazards—a quality backbone cable eliminates this risk entirely.
Usage Instructions
Connect the cable between your NMEA 2000 backbone tee connector and your device's drop port, or extend an existing backbone run to a new station. Ensure all connectors are hand-tightened and fully seated to avoid moisture intrusion. Route the cable away from high-voltage AC wiring and engine heat sources. Inspect connectors annually for corrosion and rinse with fresh water after saltwater operation.
Design & Material
The cable combines a robust outer jacket with internal shielding to protect data signals in the electrically noisy marine environment. Its compact profile fits between deck hardware, through cabin bulkheads, and along mast wiring without kinking or stress.
- High-quality marine-grade PVC outer jacket resists UV degradation and ozone
- Shielded twisted-pair construction minimizes crosstalk and electromagnetic noise
- Weatherproof connectors with corrosion-resistant metal hardware
- Flexible design allows bending without signal loss or internal conductor damage
- Black finish blends with marine electronics installations and reduces heat absorption
- Model 010-11076-04 matches Garmin's documented compatibility across the full NMEA 2000 product line
Final Verdict
The Garmin NMEA 2000 Backbone/Drop Cable eliminates guesswork from marine network expansion. Buy this cable when you need to extend your backbone beyond 10 feet, add a second display location, or replace a corroded connector run. It solves connectivity issues before they compromise your safety on the water.
In The Box
Manual & Warranty
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Overview
Garmin NMEA 2000 Backbone/Drop Cable (13ft)
Introduction
The Garmin NMEA 2000 Backbone/Drop Cable extends your marine electronics network across your vessel with a 4-meter (13-foot) connection that maintains signal integrity for reliable navigation and sensor data. This cable bridges your NMEA 2000 backbone to multiple Garmin instruments, allowing chartplotters, sounder units, and autopilots to communicate without performance degradation. Whether you're integrating a new transducer, adding a second display station, or expanding your existing network across a larger boat, this cable delivers the secure, shielded connection needed for uninterrupted data flow in saltwater environments.
Key Features
- Length: 4 meters (13.12 feet) for backbone extension or drop cable installation on larger vessels
- Shielded construction reduces electromagnetic interference and signal loss during data transmission
- Marine-grade materials engineered for saltwater and UV exposure without degradation
- Standard NMEA 2000 connectors (industry-compatible male and female terminations)
- Flexible, easy-to-route design accommodates tight installation spaces in cabins and consoles
- Waterproof connectors rated for continuous deck and below-deck use
Data Insights
Independent testing shows that high-quality backbone cables improve data transfer stability by up to 30 percent compared to unshielded or corroded alternatives. This translates to faster sounder updates, more responsive autopilot corrections, and more reliable chart rendering across your network. On vessels with multiple Garmin devices spread across 40+ feet, even small transmission delays become safety hazards—a quality backbone cable eliminates this risk entirely.
Usage Instructions
Connect the cable between your NMEA 2000 backbone tee connector and your device's drop port, or extend an existing backbone run to a new station. Ensure all connectors are hand-tightened and fully seated to avoid moisture intrusion. Route the cable away from high-voltage AC wiring and engine heat sources. Inspect connectors annually for corrosion and rinse with fresh water after saltwater operation.
Design & Material
The cable combines a robust outer jacket with internal shielding to protect data signals in the electrically noisy marine environment. Its compact profile fits between deck hardware, through cabin bulkheads, and along mast wiring without kinking or stress.
- High-quality marine-grade PVC outer jacket resists UV degradation and ozone
- Shielded twisted-pair construction minimizes crosstalk and electromagnetic noise
- Weatherproof connectors with corrosion-resistant metal hardware
- Flexible design allows bending without signal loss or internal conductor damage
- Black finish blends with marine electronics installations and reduces heat absorption
- Model 010-11076-04 matches Garmin's documented compatibility across the full NMEA 2000 product line
Final Verdict
The Garmin NMEA 2000 Backbone/Drop Cable eliminates guesswork from marine network expansion. Buy this cable when you need to extend your backbone beyond 10 feet, add a second display location, or replace a corroded connector run. It solves connectivity issues before they compromise your safety on the water.
