Garmin NMEA 2000 Backbone/Drop Cable (Right Angle, 6ft)
Garmin NMEA 2000 Backbone/Drop Cable (Right Angle, 6ft)
Model Number: 010-11089-00
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin NMEA 2000 Backbone/Drop Cable (Right Angle, 6ft)
Introduction
The Garmin NMEA 2000 Backbone/Drop Cable (Model 010-11089-00) is engineered to extend your marine network architecture while maintaining rock-solid signal integrity across all connected instruments. At 6 feet in length, this right-angle drop cable bridges the gap between your NMEA 2000 backbone and peripheral devices—chartplotters, autopilots, transducers, and other marine electronics—without the cable management headaches that plague standard configurations. The right-angle connector design eliminates the bulk and stress that plague 90-degree connections, giving you cleaner installations in the confined spaces typical of modern vessel layouts.
Key Features
- Cable Length: 1.82 meters (6 feet) for standard backbone-to-drop installations
- Right Angle Connector: Engineered to fit snugly in tight spaces with 90-degree exit angle for streamlined routing
- Signal Integrity: Maintains over 95% signal fidelity across the connection, ensuring data transmission without degradation
- Marine-Grade Construction: Built with materials rated for saltwater environments, UV exposure, and temperature fluctuations typical of marine use
- Garmin Device Compatibility: Works across Garmin's marine electronics ecosystem including chartplotters, autopilots, and sensor networks
- Weatherproof Connectors: Sealed connector ends resist corrosion and moisture intrusion common in marine applications
Data Insights
Network reliability is non-negotiable in marine navigation. The 95% signal integrity rating means that navigational data, depth readings, heading information, and autopilot commands transmit without interruption or loss of fidelity. This performance level ensures your instruments receive clean, uncompromised data for safe and accurate operation on the water, particularly critical when multiple devices draw from a single NMEA 2000 backbone.
Usage Instructions
Connect the cable's backbone end to your primary NMEA 2000 backbone trunk, then attach the drop end to your target device. Ensure all connectors seat fully until they click or lock into place. Avoid routing the cable through sharp bends, and keep it clear of engine heat sources and high-voltage electrical systems. Secure any excess cable length with clips or ties to prevent movement and strain on the connectors during vessel operation.
Design & Material
This cable combines practical engineering with durability. The right-angle connector exit eliminates the need for bulky 90-degree adapters, while the 6-foot length suits most backbone-to-instrument distances without excess coiling. Every component is selected for marine performance, not just terrestrial convenience.
- High-grade PVC outer jacket resists UV degradation and saltwater exposure
- Precision-molded connectors ensure consistent fit and electrical contact across all Garmin NMEA 2000 devices
- Internal shielding reduces electromagnetic interference from adjacent power lines and marine electronics
- Flexible cable core permits routing through tight cable channels and conduits without kinking or crushing
- Weather-sealed connector seals prevent moisture ingress that causes corrosion and signal loss
- Lightweight construction simplifies installation without requiring additional support hardware
Final Verdict
If your marine network relies on Garmin electronics, this cable isn't optional—it's infrastructure. The Garmin NMEA 2000 Backbone/Drop Cable (Right Angle, 6ft) eliminates cable clutter, maintains signal fidelity above 95%, and fits into spaces where standard cables create installation nightmares. For any serious cruiser or fishing boat operator running multiple networked instruments, this cable delivers the reliability your navigation and safety systems demand. Add it to your setup today.
In The Box
Manual & Warranty
Garmin Warranty
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Reviews
Ask a Question
Tech Specs
Garmin NMEA 2000 Backbone/Drop Cable (Right Angle, 6ft)
Introduction
The Garmin NMEA 2000 Backbone/Drop Cable (Model 010-11089-00) is engineered to extend your marine network architecture while maintaining rock-solid signal integrity across all connected instruments. At 6 feet in length, this right-angle drop cable bridges the gap between your NMEA 2000 backbone and peripheral devices—chartplotters, autopilots, transducers, and other marine electronics—without the cable management headaches that plague standard configurations. The right-angle connector design eliminates the bulk and stress that plague 90-degree connections, giving you cleaner installations in the confined spaces typical of modern vessel layouts.
Key Features
- Cable Length: 1.82 meters (6 feet) for standard backbone-to-drop installations
- Right Angle Connector: Engineered to fit snugly in tight spaces with 90-degree exit angle for streamlined routing
- Signal Integrity: Maintains over 95% signal fidelity across the connection, ensuring data transmission without degradation
- Marine-Grade Construction: Built with materials rated for saltwater environments, UV exposure, and temperature fluctuations typical of marine use
- Garmin Device Compatibility: Works across Garmin's marine electronics ecosystem including chartplotters, autopilots, and sensor networks
- Weatherproof Connectors: Sealed connector ends resist corrosion and moisture intrusion common in marine applications
Data Insights
Network reliability is non-negotiable in marine navigation. The 95% signal integrity rating means that navigational data, depth readings, heading information, and autopilot commands transmit without interruption or loss of fidelity. This performance level ensures your instruments receive clean, uncompromised data for safe and accurate operation on the water, particularly critical when multiple devices draw from a single NMEA 2000 backbone.
Usage Instructions
Connect the cable's backbone end to your primary NMEA 2000 backbone trunk, then attach the drop end to your target device. Ensure all connectors seat fully until they click or lock into place. Avoid routing the cable through sharp bends, and keep it clear of engine heat sources and high-voltage electrical systems. Secure any excess cable length with clips or ties to prevent movement and strain on the connectors during vessel operation.
Design & Material
This cable combines practical engineering with durability. The right-angle connector exit eliminates the need for bulky 90-degree adapters, while the 6-foot length suits most backbone-to-instrument distances without excess coiling. Every component is selected for marine performance, not just terrestrial convenience.
- High-grade PVC outer jacket resists UV degradation and saltwater exposure
- Precision-molded connectors ensure consistent fit and electrical contact across all Garmin NMEA 2000 devices
- Internal shielding reduces electromagnetic interference from adjacent power lines and marine electronics
- Flexible cable core permits routing through tight cable channels and conduits without kinking or crushing
- Weather-sealed connector seals prevent moisture ingress that causes corrosion and signal loss
- Lightweight construction simplifies installation without requiring additional support hardware
Final Verdict
If your marine network relies on Garmin electronics, this cable isn't optional—it's infrastructure. The Garmin NMEA 2000 Backbone/Drop Cable (Right Angle, 6ft) eliminates cable clutter, maintains signal fidelity above 95%, and fits into spaces where standard cables create installation nightmares. For any serious cruiser or fishing boat operator running multiple networked instruments, this cable delivers the reliability your navigation and safety systems demand. Add it to your setup today.
In The Box
Manual & Warranty
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Overview
Garmin NMEA 2000 Backbone/Drop Cable (Right Angle, 6ft)
Introduction
The Garmin NMEA 2000 Backbone/Drop Cable (Model 010-11089-00) is engineered to extend your marine network architecture while maintaining rock-solid signal integrity across all connected instruments. At 6 feet in length, this right-angle drop cable bridges the gap between your NMEA 2000 backbone and peripheral devices—chartplotters, autopilots, transducers, and other marine electronics—without the cable management headaches that plague standard configurations. The right-angle connector design eliminates the bulk and stress that plague 90-degree connections, giving you cleaner installations in the confined spaces typical of modern vessel layouts.
Key Features
- Cable Length: 1.82 meters (6 feet) for standard backbone-to-drop installations
- Right Angle Connector: Engineered to fit snugly in tight spaces with 90-degree exit angle for streamlined routing
- Signal Integrity: Maintains over 95% signal fidelity across the connection, ensuring data transmission without degradation
- Marine-Grade Construction: Built with materials rated for saltwater environments, UV exposure, and temperature fluctuations typical of marine use
- Garmin Device Compatibility: Works across Garmin's marine electronics ecosystem including chartplotters, autopilots, and sensor networks
- Weatherproof Connectors: Sealed connector ends resist corrosion and moisture intrusion common in marine applications
Data Insights
Network reliability is non-negotiable in marine navigation. The 95% signal integrity rating means that navigational data, depth readings, heading information, and autopilot commands transmit without interruption or loss of fidelity. This performance level ensures your instruments receive clean, uncompromised data for safe and accurate operation on the water, particularly critical when multiple devices draw from a single NMEA 2000 backbone.
Usage Instructions
Connect the cable's backbone end to your primary NMEA 2000 backbone trunk, then attach the drop end to your target device. Ensure all connectors seat fully until they click or lock into place. Avoid routing the cable through sharp bends, and keep it clear of engine heat sources and high-voltage electrical systems. Secure any excess cable length with clips or ties to prevent movement and strain on the connectors during vessel operation.
Design & Material
This cable combines practical engineering with durability. The right-angle connector exit eliminates the need for bulky 90-degree adapters, while the 6-foot length suits most backbone-to-instrument distances without excess coiling. Every component is selected for marine performance, not just terrestrial convenience.
- High-grade PVC outer jacket resists UV degradation and saltwater exposure
- Precision-molded connectors ensure consistent fit and electrical contact across all Garmin NMEA 2000 devices
- Internal shielding reduces electromagnetic interference from adjacent power lines and marine electronics
- Flexible cable core permits routing through tight cable channels and conduits without kinking or crushing
- Weather-sealed connector seals prevent moisture ingress that causes corrosion and signal loss
- Lightweight construction simplifies installation without requiring additional support hardware
Final Verdict
If your marine network relies on Garmin electronics, this cable isn't optional—it's infrastructure. The Garmin NMEA 2000 Backbone/Drop Cable (Right Angle, 6ft) eliminates cable clutter, maintains signal fidelity above 95%, and fits into spaces where standard cables create installation nightmares. For any serious cruiser or fishing boat operator running multiple networked instruments, this cable delivers the reliability your navigation and safety systems demand. Add it to your setup today.
