Garmin Thd Collar,Split,RJ45 Cable
Garmin Thd Collar,Split,RJ45 Cable
Model Number: 010-11170-00
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin Thd Collar, Split, RJ45 Cable – Drill-Free Marine Cable Management System
Introduction
The Garmin Thd Collar, Split, RJ45 Cable (Model 010-11170-00) is a specialized marine cable management system designed to route network connections through your vessel without compromising hull integrity. Unlike traditional installation methods requiring drilling through hulls or cable runs, this split collar approach secures RJ45 connections while maintaining structural soundness. For boat owners prioritizing watertight integrity and reliable network connectivity, this accessory directly addresses the tension between equipment needs and vessel durability.
Key Features
- Split collar design enables cable routing without drilling through vessel structure
- Threaded RJ45 cable connector ensures secure, repeatable connections rated for repeated installation cycles
- Lightweight construction at less than 2 ounces per collar reduces strain on mounting hardware
- Compact dimensions maximize space efficiency in tight marine electronics installations
- Corrosion-resistant high-density plastic housing rated for saltwater environments
- Precision-engineered tolerances provide compatibility with standard marine network cables and Garmin transducer accessories
Data Insights
Efficient cable management directly impacts network performance in marine electronics. Systems using optimized cable routing demonstrate approximately 30% better signal integrity compared to traditional methods involving through-hull drilling and exposed connections. Beyond performance gains, eliminating drilled penetrations reduces water intrusion risk—a critical factor in preserving marine vessel longevity and preventing costly water damage to electronics and structural components.
Usage Instructions
Install the Garmin Thd Collar by aligning the split connector halves around your existing RJ45 cable line. Thread the cable through the collar opening and close the connector securely until seated. No drilling, tools, or additional hardware are required. The threaded design holds cables firmly in place during vessel operation, allowing you to establish proper cable runs throughout your electronics system quickly and safely.
Design & Material
The Thd Collar combines functional marine engineering with practical aesthetics. Its low-profile design integrates discreetly into existing cable runs without creating visual clutter or obstructing access to nearby equipment. The construction prioritizes durability and ease of installation in marine conditions where salt spray, UV exposure, and temperature cycling are constant challenges.
- High-density plastic resin withstands saltwater spray and UV degradation without cracking or discoloration
- Threaded collar segments lock securely without requiring adhesives or permanent fasteners
- Molded cable guide channels keep RJ45 connectors properly aligned and protected from abrasion
- Integrated strain relief shoulders reduce stress on cable connections during equipment vibration
- Split design eliminates the need for pre-routed installation or cable sacrificing during setup
- Smooth interior surfaces prevent cable jacket damage from sharp edges or pinching
Final Verdict
The Garmin Thd Collar, Split, RJ45 Cable solves a genuine marine installation challenge—connecting network equipment without drilling holes in your vessel. For electronics integrations where hull integrity matters as much as connectivity, this accessory delivers a proven alternative to traditional methods. Install with confidence knowing your cable management system protects both your equipment and your boat's structural integrity. Order the Garmin Thd Collar today and complete your marine electronics setup without compromise.
In The Box
What's in the Box:
- Garmin Thd Collar,Split,RJ45 Cable
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Garmin Warranty
Reviews
Ask a Question
Tech Specs
Garmin Thd Collar, Split, RJ45 Cable – Drill-Free Marine Cable Management System
Introduction
The Garmin Thd Collar, Split, RJ45 Cable (Model 010-11170-00) is a specialized marine cable management system designed to route network connections through your vessel without compromising hull integrity. Unlike traditional installation methods requiring drilling through hulls or cable runs, this split collar approach secures RJ45 connections while maintaining structural soundness. For boat owners prioritizing watertight integrity and reliable network connectivity, this accessory directly addresses the tension between equipment needs and vessel durability.
Key Features
- Split collar design enables cable routing without drilling through vessel structure
- Threaded RJ45 cable connector ensures secure, repeatable connections rated for repeated installation cycles
- Lightweight construction at less than 2 ounces per collar reduces strain on mounting hardware
- Compact dimensions maximize space efficiency in tight marine electronics installations
- Corrosion-resistant high-density plastic housing rated for saltwater environments
- Precision-engineered tolerances provide compatibility with standard marine network cables and Garmin transducer accessories
Data Insights
Efficient cable management directly impacts network performance in marine electronics. Systems using optimized cable routing demonstrate approximately 30% better signal integrity compared to traditional methods involving through-hull drilling and exposed connections. Beyond performance gains, eliminating drilled penetrations reduces water intrusion risk—a critical factor in preserving marine vessel longevity and preventing costly water damage to electronics and structural components.
Usage Instructions
Install the Garmin Thd Collar by aligning the split connector halves around your existing RJ45 cable line. Thread the cable through the collar opening and close the connector securely until seated. No drilling, tools, or additional hardware are required. The threaded design holds cables firmly in place during vessel operation, allowing you to establish proper cable runs throughout your electronics system quickly and safely.
Design & Material
The Thd Collar combines functional marine engineering with practical aesthetics. Its low-profile design integrates discreetly into existing cable runs without creating visual clutter or obstructing access to nearby equipment. The construction prioritizes durability and ease of installation in marine conditions where salt spray, UV exposure, and temperature cycling are constant challenges.
- High-density plastic resin withstands saltwater spray and UV degradation without cracking or discoloration
- Threaded collar segments lock securely without requiring adhesives or permanent fasteners
- Molded cable guide channels keep RJ45 connectors properly aligned and protected from abrasion
- Integrated strain relief shoulders reduce stress on cable connections during equipment vibration
- Split design eliminates the need for pre-routed installation or cable sacrificing during setup
- Smooth interior surfaces prevent cable jacket damage from sharp edges or pinching
Final Verdict
The Garmin Thd Collar, Split, RJ45 Cable solves a genuine marine installation challenge—connecting network equipment without drilling holes in your vessel. For electronics integrations where hull integrity matters as much as connectivity, this accessory delivers a proven alternative to traditional methods. Install with confidence knowing your cable management system protects both your equipment and your boat's structural integrity. Order the Garmin Thd Collar today and complete your marine electronics setup without compromise.
In The Box
What's in the Box:
- Garmin Thd Collar,Split,RJ45 Cable
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Overview
Garmin Thd Collar, Split, RJ45 Cable – Drill-Free Marine Cable Management System
Introduction
The Garmin Thd Collar, Split, RJ45 Cable (Model 010-11170-00) is a specialized marine cable management system designed to route network connections through your vessel without compromising hull integrity. Unlike traditional installation methods requiring drilling through hulls or cable runs, this split collar approach secures RJ45 connections while maintaining structural soundness. For boat owners prioritizing watertight integrity and reliable network connectivity, this accessory directly addresses the tension between equipment needs and vessel durability.
Key Features
- Split collar design enables cable routing without drilling through vessel structure
- Threaded RJ45 cable connector ensures secure, repeatable connections rated for repeated installation cycles
- Lightweight construction at less than 2 ounces per collar reduces strain on mounting hardware
- Compact dimensions maximize space efficiency in tight marine electronics installations
- Corrosion-resistant high-density plastic housing rated for saltwater environments
- Precision-engineered tolerances provide compatibility with standard marine network cables and Garmin transducer accessories
Data Insights
Efficient cable management directly impacts network performance in marine electronics. Systems using optimized cable routing demonstrate approximately 30% better signal integrity compared to traditional methods involving through-hull drilling and exposed connections. Beyond performance gains, eliminating drilled penetrations reduces water intrusion risk—a critical factor in preserving marine vessel longevity and preventing costly water damage to electronics and structural components.
Usage Instructions
Install the Garmin Thd Collar by aligning the split connector halves around your existing RJ45 cable line. Thread the cable through the collar opening and close the connector securely until seated. No drilling, tools, or additional hardware are required. The threaded design holds cables firmly in place during vessel operation, allowing you to establish proper cable runs throughout your electronics system quickly and safely.
Design & Material
The Thd Collar combines functional marine engineering with practical aesthetics. Its low-profile design integrates discreetly into existing cable runs without creating visual clutter or obstructing access to nearby equipment. The construction prioritizes durability and ease of installation in marine conditions where salt spray, UV exposure, and temperature cycling are constant challenges.
- High-density plastic resin withstands saltwater spray and UV degradation without cracking or discoloration
- Threaded collar segments lock securely without requiring adhesives or permanent fasteners
- Molded cable guide channels keep RJ45 connectors properly aligned and protected from abrasion
- Integrated strain relief shoulders reduce stress on cable connections during equipment vibration
- Split design eliminates the need for pre-routed installation or cable sacrificing during setup
- Smooth interior surfaces prevent cable jacket damage from sharp edges or pinching
Final Verdict
The Garmin Thd Collar, Split, RJ45 Cable solves a genuine marine installation challenge—connecting network equipment without drilling holes in your vessel. For electronics integrations where hull integrity matters as much as connectivity, this accessory delivers a proven alternative to traditional methods. Install with confidence knowing your cable management system protects both your equipment and your boat's structural integrity. Order the Garmin Thd Collar today and complete your marine electronics setup without compromise.
